Aquacoat KS-929C

Aquacoat KS-929C is a single Component, Moisture Cured, Polyurethane Waterproof Coating that can be applied as a seamless, strong bonding, elastic and flexible waterproof film.

Packaging

• 28 kg barrel

Features

• Stable performance: The performance is stable. It possesses the property of aging-resistance, acid and alkali resistance, fatigue resistance as well as high and low temperature resistance
• Ready to use: Packed in one component and ready to use. It avoids the quality instability induced by the inappropriate compounding of two or three components
• Environmentally friendly, as it is free of pollution
• Simple construction and levelling properties. After coating, it will react with moisture in the air and cure, forming a compact, seamless, tough and high elastic waterproof film
• Compound with other membranes: It can be compounded with high polymer membrane and self-adhesive modified bitumen waterproof membrane to form a compound waterproof system

Usage Considerations

• Run it out after opening, the use time should be limited to 30 minutes after opening.
• Long-term storage will cause the forming of a thin film in the surface. Remove this film when attempting to apply Aquacoat KS-929C again - this will not impact on its ineffectiveness during use.
• Before the coating is cured:
• Avoid walking on the waterproof layer
• Avoid damaging the waterproof layer with heavy and sharp objects
• Keep the construction site well ventilated. The operator should wear appropriate PPE, including safety helmets, gloves, and working shoes, to prevent or mitigate irritation of Aquacoat KS-929C on the skin and eyes.
• Apply protective layer after checking and accepting the Aquacoat KS-929C waterproof coating.
• The site should be kept away from any fire-related sources.
• Avoid applying Aquacoat KS-929C waterproof coating on:
• Rainy days
• Snowy conditions
• Low temperature conditions

Recommended Usage Amounts

1.95~2.25kg/m² for the required 1.5mm thickness, 2.60-3.0kg/m² for the required 2.0mm thickness.

• For floors, use 0.8mm to 1.0mm thickness per coat.
• For walls, use 0.5mm thickness per coat.